euro laser cutting machine / desktop laser cutting machine for metal

Machine applications

1. Acrylic, Plexiglass, Pmma Organic board, Double Color Plate
2. Fabric, Cloth, Jeans, Cotton, Wool felt
3. Leather, Marten, Pig leather, Cow Leather, sheep leather
4. Bamboo, Wood, veneer, Plywood, MDF
5. Paper, cardboard, press borad
6. Marble tile ceramic

7. 2.5mm stainless steel, carbon steel

8. Marble, granite, stone.

Machine features

1. Water chiller.

It is used to cool the laser tube, CW3000 model for 100W, CW5000 for 130W, CW5200 for 150w.

2. Air pump or compressor.

It is used for three basic reasons. The primary reason is the push fumes away from the laser's focal lens.

This protects the lens from contaminants which could destroy the lens. The second function is to push air

into the material's kerf as created by the laser beam. Air that is applied to the kerf will remove debris/fumes and allow the laser light to penitrate deeper through the material. The third reason is that the air will help to

cool the material. If the laser cut / engraved material stays hot, then it could warp or shrink.

3. Exhaust fan.

It creates an air flow to remove dust and fumes from the work area of the laser machine. It is important to remove the dust and fumes from the laser engraving areas because dust can settle onto the mirrors or lens. Dust on the mirrors or lens will create a focal point of the laser's heat and soon destroying the optics. The fumes need to be removed from the operator work area because they can be irritating and unhealthy.

4. Worktable.

Metal - bar worktable for hard materials such as acrylic, glass, steel etc.

Honeycomb worktable for soft materials such as cloth,paper,fabric,etc.

Machine standard configuration including one of the work tables only.

Machine specifications

Machine photos

Our service